Sentiotec JUST-105D-CO Instructions D'installation Et D'utilisation page 99

Instructions for installation and use
Fan
Contact rating:
Fuse:
Setting ranges
Temperature (sauna mode):
Temperature (combi mode):
Humidity:
The maximum humidity level which can be set depends on the temperature of
the sauna. The higher the sauna temperature, the lower the maximum humidity
level which can be set.
Thermal safety
Heater sensor with excess temperature fuse (139 °C shut-off temperature)
Automatic heating time limitation 6 h*
Optional single-sensor mode or two-sensor mode
Connection cables
Power supply cable:
Heater supply cable
(temperature-resistant up to 150 °C):
Sensor wires (temperature-resistant up to 150 °C):
Light wire:
Fan wire:
* EN 60335-2-53 specifi es a heating time limitation of 6 h for saunas for private use.
WORLD OF WELLNESS
p. 49/50
100 W
1A T
55 °C to 110 °C
20 °C to 75 °C
25 % to 80 %
min. 5 x 2.5 mm²
min 2.5 mm²
min 0.75 mm²
min. 1.5 mm²
min. 1.5 mm²
En