Operating Features - IDEAL 61-327 Manuel D'utilisation Et De Sécurité

Operating Features

High Voltage Warning (HI-V)
The meter beeps once (for 1 second) and a red LED illuminates and remains on as
long as the voltage remains above 30V AC or DC, or when the meter's voltage range
is exceeded.
NOTE: This feature does not work in the Ohm or continuity modes. For ACV and
DCV, when voltages in excess of 30V is measured or the measured voltage is over
limit, then the high voltage alarm ' .' appears on the screen display,
simultaneously the LED remains RED and beeping lasts for 1 second then silent
during measurement.
Data Hold Feature
Press the Hold button to toggle in and out of the data hold mode. "H" appears in the
upper left of the meter display when data hold is active. Use the data hold feature to
lock a measurement reading on the display. Press the Hold button again to unlock
the display and obtain a real-time reading.
Auto Power Off (APO) Feature Disable
The meter automatically powers itself down after about 30 minutes of no use. Press
any button, and the meter will wake up and enter the default function of that setting
before power down. To Disable APO, press and hold the HOLD button while turning
the dial to any desired function. When APO is defeated, the "APO" will be removed
from the display. Turning the meter off and back on will restore the APO default.
10