Safe Operating Practices - Arwin Tools AGS44 Traduction De La Notice Originale

1. GENERAL POWER SOURCE SAFETY
WARNINGS
WARNING ! Read all safety warnings and
instructions.Failure to follow the warning and
instructions may result in electric shock, fire
and/or serious injury.
SAVE ALL WARNINGS AND INSTRUSCTIONS
FOR FUTURE REFERENCE

1.1 Safe operating practices

General Warning!
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they
do not play with the appliance.
Training
Become familiar with the owner's manual before
attempting to operate this equipment.
Preparation
1) Do not allow children to operate this
equipment;
2) Do not operate this equipment in the vicinity
of bystanders;
3) Wear ear protection and safety glasses at all
times while operating the machine;
4) Avoid wearing clothing that is loose fitting or
that has hanging cords or ties;
5) Only operate the machine in open space (e.g.
not close to a wall or other fixed object) and on a
firm, level surface;
6) Do not operate the machine on a paved or
gravel surface where ejected material could cause
injury;
7) Before starting the machine, check that all
screws, nuts, bolts, and other fasteners are
properly secured and that guards and screens are
in place. Replace damaged or unreadable labels;
Maintenance and storage
1) When the machine is stopped for servicing,
inspection, or storage, or to change an accessory,
shut off the power source, disconnect the unit
from the power supply, make sure that all moving
parts have come to a complete stop and where a
key is fitted remove the key. Allow the machine to
cool before making any inspections, adjustments,
etc.
2) Always allow the machine to cool before
storing;
Workplace safety
• Ensure that the area you are working in is clean
and well lit.Untidy or unlit workplaces can lead to
accidents.
• Do not use the electrical tool in an environment
prone to the risk of explosion, or in which
flammable liquids, gases or dusts may be found.
Electrical tools cause sparks which may ignite
dust or vapours.
• Keep children and other people away from the
electrical tool when it is in use.If distracted, you
may lose control of the device.
Safety tips for electronic devices
• The plug of the electrical tool must fit into the
socket. The plug may not be modified in any way.
Do not use an adapter plug in conjunction with
a grounded electrical tool.Unmodified plugs and
the appropriate sockets will reduce the risk of an
electrical shock.
• Avoid body contact with grounded surfaces, for
example, pipes, heating, ovens and fridges.There
is an increased risk of electrical shock if your body
is earthed.
• Keep the electrical tools away from rain or
damp.Water entering into an electrical device will
increase the risk of an electrical shock.
• Do not misuse the cable to carry the electrical
tool, to hang it up or to pull the plug out of
thesocket. Keep the cable away from heat, oil,
sharp edges or moving device parts.Damaged
UK
13