Operation; Starting The Freezer; Features - GE Appliances FCM16 Manuel D'utilisation Et D'installation

Operation

Starting the Freezer

1. Clean the inside of the freezer with a mild solution of
2. Connect cord to power outlet.

Features

Controls
Freezer Status Lights
RED: The red light will turn on automatically when the
temperature light is on and the temperature is above
turn the yellow light off.
GREEN: The green light is the indicator light and assures
you that your freezer is running. If the indicator light is
not glowing, immediately check for power interruption,
unplugged power cord, open circuit breaker, blown fuse,
or burned out indicator light. If the light is burned out,
contact service for a replacement.
49-60760
3. Make sure the temperature control is set the midpoint
between Cold and Coldest.
4. Allow freezer to operate for at least 6 to 8 hours
before placing food inside.
Alarm Reset
Alarm Reset
Button
Alarm Reset Button
Push the Alarm Reset button to turn the alarm off. Once
the button is pushed, the yellow light will stop flashing
and the alarm will shut off.
Temperature Control Dial
Turn using a coin in the slot to adjust the freezer
temperature between Cold and Coldest.
WARNING
Freezer must be unplugged to avoid
electriical hazard from power source when installing,
cleaning or repairing the freezer
High Temp Power
Cold Coldest
Red
Temperature
Control
5