Product Profile; Safety Instructions - Fellowes SPL A4 Mode D'emploi

Product Profile

The SPL A4, the SPL A3 and the SPL A2 are heavy-
duty laminators designed for daily office or com-
mercial use. In addition to processing standard
pouches of every thickness, SPL laminators take
standard mounting boards for durable point-of-sale
displays. To give professional users the precision
they need, all SPL models also offer degree-by-degree temperature adjustment and nine
speed options on easy-to-read digital displays.
Here is an overview of SPL laminator capacity, capabilities and special features:
OVERVIEW
Capacity
–Pouch width: Max.
DIN size
centimeters (document)
inches
–Pouch thickness: Min.-Max.
microns
mils
–Paper thickness: Max.
gr
lbs
–Entry width
millimeters
inches
Warm-up time in minutes :
90° C / 194° F (lowest)
140° C / 284° F (highest)
Processing speed in cm/inch per min.
Speed 1 (lowest)
Speed 9 (highest)
Reverse mode
Automatic standby mode
Because SPL laminators are designed to take mounting board, the entry is wide enough to
accommodate pouches containing paper much thicker than the 300 gram (80 lbs) maximum
recommended above. While filling the pouch to the limits of the entry will not damage
your machine, you may not be satisfied with the quality of the results.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING
As with any electrical equipment:
• Keep it away from heat or water sources
• Plug it in near an easily accessible outlet
• Do not use it if damaged in any way
• Do not attempt to open or otherwise repair it
• Turn it off after each use, and
• Unplug it when not in use for an extended period.
SPL A4 SPL A3
A4 A3
26 33
10-3/16 13
80-250 80-250
3-10 3-10
300 300
80 80
3.5 3.5
1/8 1/8
3 3
8 8
29/11 29/11
90/35 90/35
✔ ✔
✔ ✔
SPL A2
A2
45
17-11/16
80-250
3-10
300
80
3.5
1/8
3
8
29/11
90/35
✔
✔
3