Lcd Display - KPS PA70 Manuel D'instructions

2.2 Switch, Button And Input Jack Description
B.L/HOLD:
• Used for reading hold or back light control.
FUNC button:
• Used for measuring function switch.
RANGE button:
• Used for switching manual measuring range state.
REL button:
• Used for entering relative measurement state.
Hz/% button:
• Used for frequency and duty ratio measurement function switch.
MAX/MIN button:
• Used for maximum/minimum measurement function switch.
OFF position:
• Used for shutting off the power.
INPUT jack:
• Voltage, resistance, frequency, duty ratio, capacitance, diode, circuit con-
nection input wire connecting terminal.
COM Jack:
• Voltage, resistance, frequency, duty ratio, capacitance, diode, circuit con-
nection input wire connecting terminal.
Transfer switch:
• Used for selecting function and measuring range.

2.3 LCD Display

KPS-PA70 • Digital clamp meter
30