Husqvarna 96732270101 Manuel D'instructions page 8

INSTALLING COUNTER WEIGHTS
1. Install the counterweight mounting bracket assembly (A)
onto the front frame between the casters. Secure the
U-bolts (B) under the frame and up through the bracket
ends. Fasten the U-bolts with supplied nuts.
2. Remove the retainer (C) from the assembly latch rod (D)
and slide the rod out of the bracket.
A
3. Set the three counterweights (E) into the mounting
bracket, leaving the right hand side slots open.
E
4. Reinstall the latch rod and secure it with the retainer.
ASSEMBLY
D
C
B
8