Technical Details - Vaude BADAWI 4P Mode D'emploi

Use a brush to rub Nikwax Tech Wash in a 1:4 ratio
with water on stubborn stains. Follow up with
Nikwax Tent & Gear Solarproof waterproofing,
applying generously to the area cleaned.
When on the road, repair tears in the tent wall
with repair tape and seal from the inside with a PU
or silicon seam sealer. The seam should however
be correctly repaired as soon as possible in order
to prevent further tearing. Please contact your
retailer to do this.
Tent pole shock cords can be retightened if neces-
sary (elasticity can wear out in very cold conditions
or due to aging). To do this first remove the end cap
and then untie the knot in the cord. Retie the knot
further up the cord and replace the cap (W).

TECHNICAL DETAILS:

Depending on tent models, VAUDE tents feature
the following:
FLY:
CLASSIC 75D POLYESTER 185T PU; 3.000 MM WATER
COLUMN.
backing material.
INNER TENT:
70D POLYAMIDE RIPSTOP 190T.
Abrasion and tear resistant polyamide fabric.
FLOOR:
70D POLYAMIDE 190T, AQUALINE LAMINATED, 10,000
MM.
PU membrane; waterproof up to 10,000 mm.
ENGLISH
13