Sensor Equipment; Sensor Resistance Values - evenes MMF 230.10.120 Manuel D'installation

9 | SENSOR EQUIPMENT

The temperature sensor is preassembled on the fixed setpoint controller. In inflow
temperature control, assembly takes place on the inflow of the heating cycle, in
the in return flow temperature regulation it is assembled on the return flow of the boiler. The
recommended assembly location is approx. 0.5 m behind the heating pump. The heating tube
should be cleaned well and heat-conducting paste should be applied during the assembly of the
temperature sensor on the heating pipe. Alternatively, the temperature sensor can also be used
as an immersion sensor.

9.1 Sensor resistance values

Temperature Resistance
[°C] [W]
-20 922
-15 941
-10 961
-5 980
0 1000
5 1020
10 1039
15 1058
20 1078
25 1097
30 1117
Sensor PT1000
Temperature Resistance
[°C] [W]
35 1136
40 1155
45 1175
50 1194
55 1213
60 1232
65 1252
70 1271
75 1290
80 1309
85 1328
Temperature Resistance
[°C] [W]
90 1347
95 1366
100 1385
105 1404
110 1423
115 1442
120 1461
125 1480
130 1498
135 1415
140 1536
FIXED SETPOINT CONTROLLER MMF 230.10.120
INSTRUCTIONS
Temperature Resistance
[°C] [W]
145 1555
150 1573
155 1592
160 1611
165 1629
170 1648
175 1666
180 1685
185 1703
190 1722
195 1740
39