Manual Operating Mode - evenes MMF 230.10.120 Manuel D'installation

5 | TECHNICAL DETAILS ABOUT FIXED SETPOINT CONTROLLER
5.6 Displays in the event of a malfunction
The warning triangle is a sensor error notification.
The following errors may occur in the sensor:
• interruption
• short circuit
• measured value is not a realistic temperature
The warning triangle flashes in the event of all errors,
the temperature value display shows »Error«.

5.7 Manual operating mode

In the event of a fault, the fixed setpoint controller can be switched from automatic to manual
operation, thereby enabling emergency operation.
30 FIXED SETPOINT CONTROLLER MMF 230.10.120
basic display
Button (4) for manual operation
Button (3) for manual operation
• press - manual operation
• press - again for automatic opera-
tion. The graphic display indicates
if the button is pressed for manual
operation!
basic display
basic display
INSTRUCTIONS