Dimplex XLF50 Manuel Du Propriétaire page 16

Operation
Figure 9
C J
B. Flame Effects
Turns the Flame Effect On
and Off.
Activated by pressing the
button on the remote.
C. Heat ON/OFF
Turns the heater On and Off.
Activated by pressing the
button on the remote or the
unit.
• Indicated by the
setpoint temperature will flash
on the display, then the intake
temperature will be displayed
before turning off.
! NOTE: After the heater is
switched off, there is a 2 minute
fan delay, where the fan will
continue running before turning
off.
! NOTE: The unit can be
operated in Heat Only Mode.
16
A C D E H
Display
icon and the
I
When the unit is only running
with the heater, the
continuously be displayed on the
Display.
! NOTE: The heater may emit
a slight, harmless odor when
first used. This odor is a normal
condition caused by initial heating
of internal heater parts and will not
occur again.
D. Temperature Down
Decreases the temperature
setting.
Adjusted by repeatedly
pressing the corresponding
button on the remote.
Figure 10
A
B
D
F
H
icon will
www.dimplex.com
C
E
G
I
J