Samsung DW60A609 Serie Mode D'emploi page 310

Installation
STEP 5 Install the custom panel (For Fully Built-In models)
FBI (Fully Built-In, DW60A60**BB) models
Ø2
B
22 English
DW6500AM_DW60A6092FW_ET_DD81-04050D-02_EN.indd 22
A
A
B
1. Place the installation template on the
back of the custom panel and fix it
temporarily using transparent tape. Note
that the rear of the custom panel will be
attached to the dishwasher door.
CAUTION
• The top end of the custom panel must
be aligned with the top end of the
installation template.
• Use a custom panel between 3 kg and
7 kg.
2. Mark 14 points guided on the
installation template.
3. Remove the installation template, and
then tighten the custom panel fixers (A)
with 2 screws (B, Ø3.5 X 25) as shown in
the figure.
2021-10-06 7:29:04