Philips Satinelle ICE HP6496 Mode D'emploi page 14

EnglisH
1
Problem
The appliance
does not work.
Skin irritation
occurs.
Possible cause
The skin cooler
for underarms
and bikini line
was on the
appliance when
you epilated
your legs.
The socket to
which the
appliance is
connected is
not live.
The appliance
is not switched
on.
You did not
attach the
epilating
head correctly.
You used the
epilator for the
first time or
after a long
period of
disuse.
Solution
Only use the leg skin cooler to
epilate your legs.
Make sure the socket you use is
live. If you use a socket in a
bathroom cabinet, you may need
to switch on the light to activate
the socket.
Make sure that the appliance is
plugged in and switched on.
Place the epilating head on the
appliance and press it onto the
appliance until it snaps home
('click').
Some skin irritation may occur the
first few times you use the
appliance. This is absolutely normal
and usually disappears quickly. For
tips to reduce skin irritation, see
the first section of chapter 'Using
the appliance'. Also make sure you
keep the epilating head clean.