Technical Characteristics; Technical Specifications - Baier Elektrowerkzeuge BDN 125 Mode D'emploi

EN
3

Technical Characteristics

3.1

Technical specifications

Diamond channel cutter type
Manufacturer
Operating voltage (V / Hz)
Power consumption (watt)
Protection class
Speed (min )
-1
Disc diameter (mm)
Maximum disc thickness (mm)
Cutting width (mm)
Cutting depth (mm)
Weight (kg)
Machine
1)
Cutting disc
Speed electronics
Sound measurement
2)
L (sound pressure) dB (A)
pA
L (sound power) dB (A)
WA
Vibration measurement:
Front handle (11) 1
Rear handle (2) 1
Weight without insert tool and connection cable.
1)
Measured values for noise determined
2)
according to EN 60745. Wear hearing
protection!
Total vibration values (vector sum in three
3)
directions) determined according to EN 60745.
The vibration emission values given in this
instruction manual have been measured according
to a method of measurement standardised in
EN 60745 and can be used for comparison between
power tools. They are also suitable for a preliminary
estimate of the vibratory stresses.
The vibration emission values given represent the
main applications of the power tool. If the power
tool is used for other applications, with different
insert tools or are insufficiently serviced, this can
significantly increase the vibratory stresses over
the whole work period. For a precise estimate of the
vibration emission values, the times during which
the tool is switched off or is running but not actually
in use should also be taken into account. This can
reduce the vibration stresses over the whole work
period significantly.
| 28 |
K = 3 dB
K = 1.5 m / s
3)
m / s
2
m / s
2
Maschinenfabrik OTTO BAIER GmbH
~230 / 50 / 60
2
WARNING
Health risk due to vibrations.
Î Additional safety measures should be taken
to protect the user, e.g. wearing anti-vibration
protective gloves, correct maintenance
of power tools and insert tools, keeping
hands warm and good organisation of work
sequences.
BDN 125
1700
/ II
6500
125
3.0
max. 30
max. 30
3.6
0.130
Yes
92
100
2.77
3.69