Greenlee PVA0021 Manuel De L'utilisateur page 5

IMPORTANT SAFETY INFORMATION
Hydraulic oil can cause skin irritation.
• Handle the valve and hoses with care to prevent
skin contact with hydraulic oil.
• In case of accidental skin contact with hydraulic
oil, wash the affected area immediately to remove
the oil.
Failure to observe these precautions may result in
injury.
• Inspect the hydraulic hoses and couplings every
operating day. Repair or replace if leakage, crack-
ing, wear or damage is evident. Damaged hoses
or couplings can fail, resulting in injury or property
damage.
• Make sure all bystanders are away from the work
area when handling, starting, and operating the
tool. Nearby personnel can be injured by flying
debris or by flying parts in the event of a tool
malfunction.
Use the valve for manufacturer's intended purpose
only. Use other than that which is instructed in this
manual can result in injury or property damage.
Do not use this valve to operate a hydraulic jack.
The valve is not intended for this use.
Greenlee Tools, Inc.
Emergency stop procedure:
1. Release the lever.
2. Shut off the hydraulic power source.
Procedure for connecting or disconnecting hydraulic
hoses, fittings or components:
1. Set the PVA valve to the neutral position.
2. Move the flow lever on the power source to the
OFF position.
3. Stop the hydraulic power source.
4. Follow the sequence under Hose Connections
to prevent pressure buildup. In case some
pressure has built up, loosen hoses, fittings or
components slowly.
Note: Keep all decals clean and legible, and replace
when necessary.
5
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
PVA0021 • PVA0022