Mount The Ilm.c; Connect The Ilm.c; Test The Ilm.c; Technical Specifications - Fancom ILM.C1 Notice

Install the ILM.c and associated components as follows:
1.

Mount the ILM.c.

2.

Connect the ILM.c.

3.

Test the ILM.c.

When mounting/installing the ILM.c, the following should be observed:
Never mount the ILM.c in a room where animals are present because of the (manual) control.
Place the ILM.c at such a height that the touch screen can be used.
Mount the ILM.c on a flat surface.
Make sure that the gland nuts are at the bottom of the ILM.c.
Seal all gland nuts after connection of the ILM.c to prevent entry of dust, aggressive gases and/or
humidity
Connect the ILM.c.

Technical specifications (see page 3).

Connection diagram ILM.c1 (see page 5).

Connection diagram ILM.c4 (see page 6).

Connection diagram ILM.c6p (see page 7).
1. Check whether the ILM.c has been connected correctly.
2. Check whether the ILM.c works optimally.
Gndf
g
3