deuter KID COMFORT ACTIVE Mode D'emploi page 11

prevent any unexpected movements from
the child bringing the bearer off balance. Co-
lour-coded buckles at the side make the har-
ness system clear and easy to operate and
access. And the seat height is easy to adjust,
even when the child is sitting in the cockpit.
(3. Adjusting the 5-point safety harness)
C
the back without additional help. (6. Putting
on and taking off the child carrier)
D
sun radiation especially on hot summer days
or at high altitude. The sun shade is available
to buy separately as an accessory for the
Kid Comfort Active, comes included with the
Kid Comfort and comes attached with the Kid
Comfort Pro model. (5. Fitting the sun shade
and rain cover)
E
the chin level with the upper half of the chin
pad. The width of the seat cushion matches
the adjusted seat height and, in combination
with the specific foot loop construction, en-
sures the sitting posture is ergonomic. The
width increases with the height of the seat to
guarantee a natural slightly splayed 'frog leg'
position; the lower the seat the narrower the
width for a more upright sitting position.
(2. Adjusting the child seat)
F
into the seat by themselves. It also makes
KidComfort_Booklet_Insert_22.indd 11 KidComfort_Booklet_Insert_22.indd 11
Two sturdy grab handles make the
Kid Comfort carriers easy to lift onto
The sun shade option protects the
child's sensitive skin from harmful
Height adjustable seat means the
child always sits in the ideal position:
The simple and safe side entry is very
popular with children who like to climb
lifting your child into the carrier easier.
G
The height adjustable foot loops
support circulation to the child's legs
and prevents them from going numb or getting
too cold. The foot loops are flexible, so the
child can change its leg position or sitting
position, yet cannot be used to raise itself out
of the seat. This construction also prevents
the child carrier from swaying during use or
tipping over when down on the ground.
(4. Adjusting the height of the foot loops)
H
The sturdy aluminium frame with
its wide kickstand makes it safe and
easy to load and unload.
I
Specially constructed back systems
guarantee deuter's high standards of
carry comfort:
LITE AIR SYSTEM
Light and airy with perfect load transfer
The ultra-lightweight, compact, full-contact
back system is directly connected to the
frame of the carrier, ensuring optimum load
transfer and stability, even with very light
loads. The Lite Air back panel sits compactly
while the structure gives it excellent ventila-
tion performance.
AIRCOMFORT SENSIC VARIO
Optimised load transfer with maximum ven-
tilation
The Sensic System makes innovative use of
the void between the child carrier and the
back of the person carrying it. This is where
the Aircomfort mesh performs its ventilation
function by allowing moisture vapour to es-
EN
02.03.21 16:36 02.03.21 16:36