Barazza 1FOFM7 Manuel D'installation Et D'emploi page 22

Table des Matières

Publicité

C) Modification /Désactivation des configurations (fig. 19)
Faire défiler la séquence des fonctions en appuyant
sur la touche SELECT
qui clignote. Modifier la DURÉE DE CUISSON avec
les touches "+" ou "-". Le compte à rebours peut être
désactivé en amenant la valeur sur 00:00 h:min.
19
Auto
Man
Auto
Man
Le temps configuré échoue lorsque la valeur atteint
00:00 h:min. Le symbole man clignote et un SIGNAL
SONORE est émis.
En appuyant sur la touche SELECT
la modalité MANUELLE. L'écran affiche le symbole
man non clignotant et l'HEURE DU JOUR courante,
le SIGNAL SONORE se désactive.
Tourner les manettes (1) et (2) pour configurer la
température et le type de cuisson à "0".
MANUELLE AVEC CONFIGURATION AUTOMATIQUE
(allumage et extinction automatiques)
Cette modalité permet de programmer le temps et
l'horaire de fin de cuisson: une fois définis ces deux
paramètres le four NE DÉMARRERA PAS immédiate-
ment, mais successivement en mode automatique,
en fonction du temps de cuisson programmé et de
l'heure à laquelle les aliments doivent être prêts.
Ex : temps de cuisson configuré : 1 heure et 30
minutes, fin de cuisson configurée : 13:00 (heure
à laquelle on souhaite que l'aliment soit prêt) -> le
four démarrera automatiquement la cuisson à 11:30
À la fin du temps programmé, un signal sonore indi-
quera que la cuisson est terminée et le four s'éteindra
automatiquement.
All manuals and user guides at all-guides.com
jusqu'à trouver le symbole
h:min
min:sec
h:min
min:sec
BEEP
on passe à
C) Modifying / Deleting the settings (fig. 19)
Step through the sequences of function with Touchpad
SELECT
until the symbol
KING TIME by "+" or "-". The countdown is deleted by
setting to 00:00 h:min.
h:min
min:sec
Auto
Man
The cooking time has expired once the time has
reached 00:00 h:min. The symbol man flashes, an
ACOUSTIC SIGNAL occurs.
Touching SELECT
the MANUAL mode. The symbol man is displayed
continuously, the current TIME of DAY is displayed.
Turn knobs (1) and (2) that set the temperature
and cooking type to "0".
MANUAL WITH AUTOMATIC SETTINGS
(the oven is turned on and off automatically)
In this mode, you can programme both the cooking
time as well as the end of cooking time: once these two
parameters are set the oven will NOT start immediately
but later, in automatic mode, based on the set cooking
time and the time you want the dish to be ready.
Example: cooking time set: 1 hour and 30 minutes,
cooking end time set: 13:00 (time at which you would
like the food to be ready) -> the oven will automatically
start cooking at 11:30.
At the end of the set time, a bell will indicate that the coo-
king is complete and the oven will turn off automatically.
22
flashes. Set the COO-
h:min
min:sec
Man
Man
n
BEEP
again, causes a change to

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1fofmp

Table des Matières