Publicité
Les langues disponibles
Les langues disponibles
WARNINGS AND SAFETY
Handling guidelines:
DANGER!
Movement of the unit must be performed with care, in order to avoid damage to the external struc-
ture and to the internal mechanical and electrical components. Also make sure that there are no
obstacles or people along the route, in order to prevent the risk of impact, crushing or tipping the
lifting device. The unit has sharp edges; use gloves during installation/adjustment.
All the operations listed below must be carried out in accordance with current health and safety
regulations, with reference to the equipment used as well as the procedures followed. Before
commencing handling operations, ensure that the lifting device has the required capacity for the
unit in question.
The units can be moved or lifted by hand or by means of a suitable truck. If the unit weighs more
than 30 kg and is to be handled manually, this must be carried out by two persons: however, it is
recommended to use a truck. If several units need to be moved at the same time, it is advisable to
put the units in a container and lift them by means of a crane or similar vehicle.
Storage conditions:
Packaged units can be stored by stacking a maximum of four on top of eache other and must be
stored in a dry area.
Technical spaces and positioning:
IMPORTANT
Incorrect positioning or installation of the unit may amplify noise levels and vibrations generated
during operation.
PACKAGING AND COMPONENTS
Follow these instructions to remove the packaging:
- check for any visible damage
- open the packaging
- check if the manual is in the package
- remove the packaging material and dispose it in the appropriate collection points or recycling
facilities, in compliance with the local regulations.
SAFEGUARD THE ENVIRONMENT
Dispose of the packaging materials in compliance with the national or local legislation.
DANGER !
Do not leave the packaging within reach of children.
|
jaga
BRIZA 22 HYBRID BUILT-IN installation instructions 73
EN
Publicité
Chapitres
