Resetting A Key To Its Original Function - Philips SRP4004/86 Mode D'emploi

8
9
For some TV brands / types, this key will only turn off the
TV. You will have to press a digit button (direct channel
selection) to turn on the TV again.
3.2
If an improved key (see chapter 2.3.2.) still does not
function as expected, you can always reset the key to its
original function.
1
2
3
10
SRP4004_86_Manual.indd 10
# HELP / / .......... • s elects between one and two-figure
............ digit keys for direct channel / track
................................ switches the selected device on / off.
Note

Resetting a key to its original function

In the current device
mode, keep digit keys
pressed
and
simultaneously for
5 seconds, until the red
Setup LED lights up.
• T he remote control is now in setup mode.
Press digit keys
and , in that order.
• A fter each key press
the device selection key
blinks once.
Press the key you wish to
reset twice. E.g. the 22 key.
• A fter each key press
the device selection key
blinks once.
• T he device selection key
will blink one more time to confirm that the key was
succesfully reset to its original function.
EN
channel numbers and channel
numbers with more than two or
three figures.
• STB: Help.
selection.
5 sec.
, ,
2 x
28-05-09 18:17