tiko Energy Solutions K-Box A6 Mode D'emploi page 8

K-Box A6 User's Manual
Device Characteristics
Product Number
Input / Output Voltage
Input / Output Current
Input / Output Wire Specification*
Relay Switching Voltage
Relay Switching Current
Relay Wire Specifications
Frequency
Voltage of breaker before K-Box
Current of breaker before K-Box
Min. Measurable Current
Max. Measurable Current
Measurement Tolerance
User Interface
Connectivity
Dimensions
Weight
Max. Power Consumption
* A wire cross-section of 1.5 mm² / AWG 16 may be used as long as an appropriate boot-
lace ferrule is properly crimped onto the wire.
Temperature (min.)
Temperature (max.)
Relative Humidity
Maximum Altitude
tiko Energy Solutions AG
English
Specifications
01.9006
CK-01.9006-P3
3 x 230/400 VAC
max. 65 A
2.5 mm² – 25 mm² (AWG 4 ~ 14)
100 V – 240 V
max. 10 A
0.14 mm² – 1.5 mm² (AWG 16 ~ 26)
50 Hz
max. 420 V (3 phases)
max. 65 A
± 0.1 A
± 65 A
± 1% @ 1 A – 65 A
2 push buttons, 2 LEDs (green)
PLC HomePlug GreenPHY
106 x 92 x 70 mm
430 g
Relay activated: less than 2 W
Relay deactivated: less than 1.5 W
Operating Conditions
-10 °C
+55 °C
10% - 85%
no condensation
2000 m
Storage Conditions
-20 °C
+70 °C
5% - 95%
no condensation
-
IM-0005-0001 Rev. 10
8 / 44