Installation; Connection; Batteries Setting Up; Batteries Use - Geemarc 200 Mode D'emploi

Installation

1 - Connection

- Connect the line cord plug to the line socket on the base. Connect the other end
of the line cord to the PTT socket. (**)
- Plug the power cable into the power socket on the base. Plug the adaptor into
the mains supply. (*)

2 - Batteries setting up

Install the rechargeable batteries in the handset. The handset requires three Nickel
Metal Hydride (NiMH) AAA batteries. These are supplied with your telephone.
Check the battery polarity diagrams on the handset when inserting the batteries.
Fit the battery cover by sliding the cover on to the back of the handset until it
snaps shut

3- Batteries use

Place the handset on the base, a short beep will be heard. The Power/Charging
indicator lights up (red). The battery symbol will be displayed on the
handset. Once the handset is fully charged, the display will show a full battery
symbol.
9