Cr-515 Remote Control - Arcam DV135 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CR-515 remote control

The CR-515 is a remote control designed for use
with Arcam DVD players. Some owners may wish to
use a dedicated remote in preference to a Universal
remote control.
DISP (display)
Press to cycle through the front panel display's
brightness options (dim to bright, off).
*
This button is not currently used.
Numeric keys
Gives direct access to individual tracks on audio
CDs. For tracks greater than 9, enter the digits in
sequence. For example, to play track 15, press
then
, then
.
5
OK
SRCH (search)
Displays Search menu with Time, Title and Track
options.
OPEN
Opens and closes the disc tray
Fast play and Skip chapter/tracks
7 8
0 /
Play fast (
) and Skip (
in both directions.
SETUP
Ensure no disc is playing and press
access the 'Setup' menu.
Press
a second time to exit the setup menu.
SETUP
Playback control
;
4
Pause (
), Play (
) and Stop (
Advanced controls
These buttons are described on the next page.
Remember to install
the two AAA batteries
supplied before trying to
use your remote control.
DV135
E-8
,
1
) chapters/tracks
to
SETUP
<
).
On/Standby
This allows the DV135 to be put into and taken out
of stand-by remotely.
����
����
����
�����
����
������
��
�����
����
����
����
�����
���
����
�����
����
�����
���
���
����
�����
������
HDMI
Selects the picture resolution for HDMI output.
CLEAR
Use
to clear a numeric field.
CLEAR
Page Up/Down (DVD-audio)/
Slow play (other discs)
DVD-audio: Some DVD-audio discs allow the user
to browse through images (photographs of the
artist, lyrics, etc.) while music is being played. Use
3
4
the
or
buttons to change to the previous/
next page. Note that this is not available on all
DVD-audio discs.
3
4
Other discs: Press
or
on the remote control
to play slow forward or backwards. Press the
button repeatedly to cycle through the different
speeds. To resume normal playback speed, press
.
PLAY
Note that slow-play does not apply to audio CDs or
DVD-audio discs.
STATUS
Press
to give play status information about
STATUS
the current disc. Press
STATUS
status display.
The status information displayed varies depending
on the type of disc – DVD, CD or VCD.
Navigation buttons
Arrow buttons allow navigation around the Basic
and Advanced Set-up menus on the DV135.
Confirm a selection by pressing
MENU
Activates the DVD menu if available.
MUTE
Press once to mute an Arcam amplifier. Press
again (or use
volume) to un-mute.
+/–
Volume +/–
Adjusts the volume on Arcam remote-controllable
amplifiers.
Note that the volume (+/–) controls and
button have no effect on the audio output level of
the DVD players.
If the remote control receiver
(located on the right of the front-
panel window) is not 'visible' to the
remote control hand-set, then the
remote control will not work! Either
locate the unit differently, or take
advantage of the remote control
input on the rear of the player
(consult your dealer for further
information on this option).
again to close the
.
OK
MUTE

Publicité

Table des Matières
loading

Table des Matières