Ossa TR 280i Manuel De L'utilisateur page 20

Multi-function
Temperature selector
To select the unit of temperature,
either ºC or ºF, press button 1.
Confirm the selection by
pressing button 2.
Danger temperature selector
Note:
This stage should only be
implemented for those vehicles
that have an optional temperatu-
re sensor. When the motorcycle
temperature exceeds the set
value, right-hand warning light
comes on.Default value: 110ºC
(230ºF).
Enter the value by pressing
button 1 repeatedly. To move on
to the next digit, press button 3.
Confirm the selection by
pressing button 2.
20 User manual
1 2 3
1 2 3
Warning temperature selector
Note:
This stage should only be
implemented for those vehicles
that have an optional temperatu-
re sensor. When the motorcycle
temperature exceeds the set
value, the left-hand warning light
comes on.
Default value: 90ºC (190ºF).
Enter the value by pressing
button 1 repeatedly. To move on
to the next digit, press button 3.
Confirm the selection by
pressing button 2.
Gear change turn rate selector
When the set rate is near to
being reached, the left-hand
warning light will flash, indicating
the need to change gear.
Default value: 6000 rpm
Enter the value by pressing
button 1 repeatedly. To move on
to the next digit, press button 3.
Confirm the selection by
pressing button 2.
1 2 3
1 2 3