T-Fal FV18 Serie Mode D'emploi page 18

IS THERE A PROBLEM WITH YOUR IRON?
PROBLEMS
Your iron
produces little to
no steam.
The soleplate
is scratched or
damaged.
The iron steams
once the water
tank has been
filled.
The spray
function does not
spray any water.
If you have any problems or queries please call our Customer
Relations team first for expert help and advice.
See Helpline number in the separate guarantee
POSSIBLE CAUSES
The water tank is empty.
The anti-scale rod is dirty.
Your iron is clogged up with
limescale.
Your iron has been used for
too long in the dry ironing
function.
You have placed your iron on
a metallic iron rest or ironed
over metal zips or fastners.
The steam control is not set
to
.
The water tank is too full.
The water tank is not full
enough.
and country list leaflet.
SOLUTIONS
Fill it up.
Clean the anti-scale rod.
Please refer to the "Cleaning the
Anti-Scale Rod" paragraph.
Clean the anti-scale rod and the iron.
Please refer to the "Cleaning the
Anti-Scale Rod" and "Cleaning the
Iron" paragraphs.
Cleaning the iron. Refer to
"Descaling the steam chamber"
section.
Always place your iron on its heel rest
when not in use.
Do not iron over metal zips or fastners.
Ensure that the steam control is set
to .
Do not exceed the max level for filling.
Add water to the water tank until
max level.
18