Power Down - Berger Move Notice

Blue
Press and immediately release the power inserter button to start a scan.
The LED will flash quickly during the scan. The antenna unit may lock onto the satellite in as
little as 2 minutes, but may occasionaly take up to 10-15 minutes.
Blue
When scan is complete and the satellite is found, the LED will turn solid blue.
Watch TV!
eats
solid red
If the satellite is not found the LED will turn solid red.
Verify all connections are properly made and that the receiver is on. Check for line of sight
obstructions, and if need be, move the antenna to have a better view of the southern sky.
Press the button to start a new scan.
After a period of inactivity, the Move will enter standby mode. You will know the system
is in standby mode as the light turns dim orange. The system will continue to function in
standby mode.
To exit standby mode, the button must be pressed. You will know the system has now
exited standby mode as the light will come on.
Note: You will not need to rescan your Move on exiting standby mode unless the antenna
has been moved.
ENGLISH ENGLISH
Off Blue
Off Blue
Off
Off Blue
Blue

POWER DOWN

Off Blue Off
19 19