Electrical Connections - Dri-Eaz Studebaker AirPath Manuel Du Propriétaire

Masquer les pouces Voir aussi pour Studebaker AirPath:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ELECTRICAL CONNECTIONS

This unit is designed to operate on a 115V/60 Hz electrical
connection. Make sure that the electrical outlet is grounded
and that all safety precautions (outlined on page 1 of this
manual) are taken.
MAINTENANCE
Always turn off the power and unplug the unit before
performing maintenance procedures. WARNING! Turn off and
unplug unit before servicing or clearing obstructions.
Weekly Maintenance
Keep Unit Clean
: Keep outlet air vents clear of lint/dust
debris by vacuuming out as needed.
Monthly Maintenance
Clean Components
:
• Using a Phillips #2 screwdriver, unscrew the four screws
connecting the bottom grill and the wire support grill
behind it. Carefully lift off bottom grill. CAUTION! Watch
for pinch points when handling grill; careless handling
could result in injury.
• Next, inspect blades for dirt, dust and debris. If dirty, wipe
down the blades with a damp cloth.
• Use a vacuum or a damp cloth to remove lint and dust
from motor and grill covers. WARNING! Do not allow
water into the motor. A buildup of lint and dust will reduce
the airflow and may cause the motor to overheat and
become a fire hazard.
Inspect Motor
: Look for debris or damage to motor. Call an
Authorized Service Center, or the Dri-Eaz Service Department
for help at 888-867-3235 or 360-757-7776.
Do Not Wet Motor
: To prevent damage to motor, do not use
a hose or pressure washer to clean the unit. If motor becomes
wet, let motor dry before using again. WARNING! Keep motor
dry, a wet motor could result in personal injury.
Exterior Inspection
: Evaluate exterior components and make
sure they are properly installed. If you hear any abnormal
sounds when running the unit, call an Authorized Service
Center or the Dri-Eaz Service Department at 888-867-3235 for
information on parts or repairs.
SPECIFICATIONS
Model
F377
38 lbs
Weight
17.3 kg
Dimensions
14.7 × 25.4 × 26 in.
(D x W x H)
37.3 × 64.5 × 66 cm
Speed
2 speed switch
Amps
7.5 amps
Power
746 W (1.0 HP) / 120V / 60Hz
25 ft.
Cord Length
7.62 m
Fan
8 Blades
Construction
Rotomolded shell
Wheels
Plastic
Safety
ETL listed to UL and CSA standards
Specifications are subject to change without notice.
Some values may be approximate.
FOR PARTS AND SERVICE CALL YOUR LOCAL DISTRIBUTOR,
or the Dri-Eaz Service Department at 888-867-3235 or
360-757-7776

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

F377

Table des Matières