Tectro TBH 570-2 Manuel D'utilisation page 150

ECONO SEND
TURBO
ECONO
AUTO
ON 1
TURBO
ON 2 CANCEL
ECONO
ON 1
TURBO
ON 2
ON 1
ECONO SEND
ON 2
TURBO
ON 1 AUTO
ON 2 CANCEL
ECONO
TURBO
ON 1
ECONO SEND
ON 2
TURBO
ECONO
AUTO
ON 1
OFF 1
TURBO
ON 2 CANCEL OFF 2
ON 1
ECONO SEND
ON 2
TURBO
AUTO
ON 1 OFF 1
ON 2 CANCEL OFF 2
ECONO SEND
TURBO
ON 1 AUTO
ECONO SEND
ON 2 CANCEL
TURBO
AUTO
ON 1
ON 2 CANCEL
SETTING THE TEMPERATURE
Use the
ECONO
40ºC). When the desired temperature has been selected, press
TURBO
ON 1
ON 2
SETTING THE HEAT OUTPUT
Use the
(3). The text on1-on2-on3-on4 or on5 will appear on the stove. The power (2) will
also be shown on the remote control. You can also select Auto mode. See figure 6.
4
150
Speed 2 (on2)
Speed 3 (on3)
Speed 4 (on4)
Speed 5 (on5)
SEND: Use this button to confirm the selected mode and send it to the stove.
SEND
ECONO: Use this button to activate/deactivate the ECONO mode. Hold the OFF 1
button down for at least 2 seconds to activate/deactivate this mode.
OFF 2
SEND
AUTO
OFF 1
TURBO: Use this button to activate/deactivate the TURBO mode. Hold the
CANCEL OFF 2
AUTO
OFF 1
button down for at least 2 seconds to activate/deactivate this mode.
CANCEL OFF 2
CLOCK: To set the clock mode on the remote control, proceed as follows:
ECONO SEND
OFF 1
1. Press
TURBO
ON 1 AUTO
OFF 1
2. The symbol appears and the time flashes.
OFF 2
ON 2 CANCEL OFF 2
ECONO SEND
3. Use the buttons to set the hours and minutes.
ECONO SEND
TURBO
SEND
ON 1 AUTO OFF 1
4. Press the again to confirm and press
TURBO
ON 2 CANCEL OFF 2
ON 1 AUTO OFF 1
ON 2 CANCEL OFF 2
AUTO
OFF 1
ON1: Use this button to set a schedule for switching the stove on automati-
CANCEL OFF 2
cally (programme 1).
SEND
OFF1: Use this button to set a schedule for switching the stove off automat-
ically (programme 1).
AUTO
OFF 1
CANCEL
OFF 2
ON2: Use this button to set a schedule for switching the stove on automati-
cally (programme 2).
OFF2: Use this button to set a schedule for switching the stove off automat-
ically (programme 2).
OFF 1
AUTO: Use this button to repeat the set timer programmes (1 and 2) dai-
OFF 2
ly. Hold the button down for at least 2 seconds to activate/deactivate this
mode. The display shows AUTO.
OFF 1
OFF 2
CANCEL: Use this button to cancel the programmed switch-on or switch-off
times.
ECONO SEND
and buttons (1&2) to set the desired temperature (from 7ºC to
TURBO
SEND
AUTO
ON 1 OFF 1
ON 2 CANCEL OFF 2
AUTO
OFF 1
CANCEL OFF 2
button (1) to select the desired heat output setting. Then push
ECONO SEND
TURBO
ON 1 AUTO OFF 1
ON 2 CANCEL OFF 2
.
ECONO SEND
TURBO
ON 1 AUTO OFF 1
ON 2 CANCEL OFF 2
(3). See figure 5.
ECONO SEND
TURBO
AUTO
ON 1 OFF 1
ON 2 CANCEL OFF 2
ECONO SEND
TURBO
ON 1 AUTO
OFF 1
ON 2 CANCEL OFF 2