Drawer Installation; Bsh Home Appliances Corporation Support - Thermador MicroDrawer MD24WS Guide D'installation

Drawer Installation

1. Place the drawer adjacent to the wall or cabinet open-
ing. Plug the power supply cord into the electrical
outlet.
2. Carefully guide the drawer into the prepared opening.
Avoid pinching the cord between the oven and the
wall.
3. Slide the drawer all the way until the mounting flange
makes contact with the face of the cabinet for stan-
dard installation or side cleats for flush installation.
See Figure 7A.
4. Open the drawer. Using the 4 holes on the drawer as
a template, pre drill the cabinet using a 1/16" bit. See
Figure 7A.
5. Secure the drawer with the 4 screws supplied. See
Figure 7B.

BSH Home Appliances Corporation Support

Service
We realize that you have made a considerable investment in
your kitchen. We are dedicated to supporting you and your
appliance so that you have many years of creative cooking.
Please don't hesitate to contact our STAR
Support Department if you have any questions or in the
unlikely event that your THERMADOR
service. Our service team is ready to assist you.
www�thermador�com/support
800-735-4328
English 10
Customer
®
appliance needs
®
Figure 7A
Parts supplied
4 Screws
Figure 7B
Parts & Accessories
Parts, filters, descalers, stainless steel cleaners and more
can be purchased in the THERMADOR
www�thermador-eshop�com
Cleat
Mounting
flange
eShop or by phone.
®