Recalling Past Readings - Fora FocusTemp Mode D'emploi

RECALLING PAST READINGS

FORA FocusTemp stores 30 of the most recent readings.
1. Press and release the SCAN button to turn on the thermometer.
2. Press and hold the MEMORY button for 1 second to enter the
memory mode which is indicated by a flashing "
The most recent reading which is stored will be displayed.
3. Press and release the MEMORY button to scroll through older
readings.
4. When left idle for 30 seconds, the thermometer will be switched
off automatically.
Note:
When the memory is full, the oldest result deleted as the new
ones are added. While recalling previous readings, you may
take a measurement by pressing the SCAN button.
EN-12
" symbol.