INKBIRD IHC-200-WIFI Mode D'emploi page 9

sure that the device is in the Smartconfig
state (the LED symbol is flashing rapidly,
interval flashing 250ms).
(2) Check if the LED symbol is blinking
rapidly and confirm on your app if it is, then
enter your Wi-Fi password to connect to
wireless network, click "Confirm" to connect
the device.
Wi-Fi router.
4.4 Connect the device in AP mode
Plug the device in the socket and make
sure that the device is in the AP
Configuration State (the LED symbol is
flashing slowly, interval flashing 1500ms).
Click "Confirm indicator slowly blink" and
then select Wi-Fi network, enter Wi-Fi
password, click "Confirm" to enter
8