INKBIRD IHC-200-WIFI Mode D'emploi page 16

-
fication stops, then return to normal
humidity control mode.
6.2 High/Low Humidity Alarm (AH,AL)
The equipment will alarm if the value of
high humidity alarm (AH), the PV screen will
display the set value of high humidity alarm
(AH) and the current humidity value
alternately, the buzzer will alarm like
"bi-bi-Biii"until the value of measured
humidity (PV) < the set value of high
humidity alarm (AH). You can also stop the
alarming by pressing any button of the
equipment.
The equipment will alarm if the value of
Low humidity alarm (AL), the PV screen will
display the set value of low humidity alarm
(AL) and the current humidity value
alternately, the buzzer will alarm like
"bi-bi-Biii" until the value of measured
humidity (PV) > the set value of low humidi-
ty alarm (AL). You can also stop the
alarming by pressing any button of the
equipment.
Note: The setting value of low humidity
alarm (AL) should be less than the setting
value of high humidity alarm(AH).
6.3 Dehumidification Delay Time (PT)
The equipment will not start immediately in
15