Disinfecting The Nebulizing Parts - Omron COMP A-I-R NE-C801 Mode D'emploi

5.2

Disinfecting the nebulizing parts

Always disinfect the parts after the last treatment of the day. If the parts are heavily
stained, replace them with new ones.
To select a method for disinfection, refer to the table on page 20.
Caution:
Do not use an autoclave, EOG gas sterilizer or low temperature plasma
sterilizer.
Handling the Vaporizer Head
The vaporizer head is an important part that is used to vaporize medication.
Be sure to observe the following precautions when handling it.
Notes:
• Always wash the vaporizer head after each
use.
• Do not use a brush or pin etc., to clean the
parts.
• When disinfecting the parts by boiling, be
sure to boil them in plenty of water.
• Do not boil vaporizer head together with other
objects, other than applicable nebulizer
accessories.
5. Cleaning and disinfecting
Baffle
Vaporizer Head
EN
19