sEctIoN 5
5.6
torch Body
•
Inspect O-rings daily and replace if damaged or worn.
•
Apply a thin coat of silicone grease to O-rings before assembling torch. This facilitates easy future as-
sembly and disassembly for service.
•
O-ring (1.61 I.D. X .070 BUNA-70A).
WarNINg
•
Keep electrical contract ring contact points free of grease and dirt.
•
Inspect ring when changing nozzle.
•
Clean with cotton swab dipped in isopropyl alcohol.
ElEctrIc shocK caN KIll!
BEforE pErforMINg torch MaINtENaNcE:
•
Turn power switch of the power source console to the OFF position
•
Disconnect primary input power.
Contact Ring Screw
O-Ring locations
Contact Ring Points
Contact Ring Points
163
MaINtENaNcE
Contact Ring