golmar Stadio Plus T4003ML Manuel D'installation page 45

43
Break the bottom flange
H
old the door panel on the embedding box.
To hold the door panel on the embedding box,
insert the hinges in the embedding box lockers
as shown.
DOOR PANEL INSTALLATION
to pass the cables through.
Select a direction to open the door panel; this selection should ease
the door panel wiring.
The opening direction will be settled through the hinges position,
that must be passed through the header clips as shown.
For example, if the hinges are placed on both clips of the lower
header, the door panel will open downwards; if they are placed
on the right clips of both headers, the door panel will open to left.
P
reparing the embedding box.
Pass the wiring through the hole made in
the bottom part of the embedding box.
Level and flush the embedding box.
Once the embedding box is placed,
remove the protective labels
from the attaching door panel holes.