Physical Connection - Bosch 1400 Serie Guide D'installation Rapide

28 en | System Setup – First Steps
7.
8.
3.3.2

Physical Connection

The system comes with a VGA graphic connector and with PS2 connectors for mouse and
keyboard.
1.
2.
3.
- | V1 | 2011.03
This dialog box allows you to set the IP address configuration according to the
requirements of your network.
Reboot the system.
Connect a monitor, mouse and keyboard (not part of the shipment) to the disk array and
start up the system.
Note:
When connecting a PS2 mouse or keyboard device after the system has been booted it
will most likely not operate properly.
When the system has started up, press Ctrl+Alt+Del, then type the default password
WSS4Bosch once the disk array login window is displayed.
On first login the desktop default settings are applied. This will take a few seconds and
the system will reboot. After system reboot, log on again and the Bosch VRM Appliance
Quick Installation Guide
1400 Series/4-bay IP Video Storage System
Bosch Sicherheitssysteme GmbH