Table des Matières
Publicité
Ensuring the door seals correctly:
It is normal for the seal to be compressed after the door has been reversed. With the door
closed, use a hair dryer to expand the seal and fill the gap between the door and the body
of the appliance. Take care not to use the hair dryer too close to the appliance, which could
damage the seal. A distance of approximately 10cm should be adequate. When completed,
allow the seal and door to cool before touching them. Once done, the seal should remain
in position.
29
Publicité
Chapitres
Table des Matières
Dépannage
