Decoder Functions And Cv Settings - Marklin Digital 60906 Mode D'emploi

Logical Functions
Since these functions are merely carried out by software, a
physical output is not needed for this. We therefore speak
here of a logical function.
Acceleration and Braking Delay
• The acceleration and braking time can be set separately
from each other.
• The ABV logical function shutoff can be assigned to any
function button by means of function mapping.
Switching Range (RG)
• The switching range causes a reduction in the current
speed. This allows a fine touch to the control of the
locomotive. The switching range can be assigned in mfx
and DCC to any function button by means of function
mapping. It must be set (see CV table, page 22 CV 137 and
for mfx in the Central Station menu).

Decoder Functions and CV Settings

In the following, you will find the functions and the CVs
shown in the form of tables. Using these CVs, you have the
option of changing a multitude of settings and the assign-
ment of function buttons.
You will find the CVs and their applications for the track
formats fx (MM) and DCC in separate tables.
You can set the mfx track format easily using the
60213/60214/60215/60216/60226 Central Station display.
16
Table for the Physical Outputs
Mode Effect
0 Off
1 Dimmer
2 Blinking Light 1
3 Blinking Light 2
4 Flashing Light
5 Double Flashing Light
6 Firebox
7 Smoke Generator
8 Zoom
9 Mars Light
10 Gyro Light
11 Forward Light according to "Rule 17"
12 Reverse Light according to "Rule 17"
13 Neon Lights
14 Energy-Saving Lamp
15 Soft Telex