Detach Soft Goods - Joie trillo LX Mode D'emploi

!
To ensure the correct head
support height is obtained,
the bottom of the headrest
MUST be even with the top
of child's shoulders as
shown in and the
21
shoulder belt must be
positioned in the red zone
as shown in .
22
!
Place a booster firmly
against the back of a
forward-facing vehicle seat
equipped with a lap/
shoulder belt.
!
Have your child sit in a
booster with their back flat
against back of a booster.
!
NOT as shown in
24
buckle and pull up on the
shoulder belt to tighten.
!
If the belt lays across child
neck, head or face, readjust
head support height.
!
Belt must not be twisted.
13
21
22
23
. Fasten
24
Use Cupholders
see images
25

Detach Soft Goods

see images
26
Open 2 pairs of buttons and 6
pairs of elastics on the back
of soft goods to remove it.
!
Pull down to remove button as
-1
26
To refit the seat pad simply
reverse the steps above.
12
25
26
26
1
PULL
14