Programming With „Programming Mode - CASO DESIGN CMP1800 Mode D'emploi

You can add additional cooking time with the appropriate power level. Up to three stages
can be programmed.
 Starting the cooking programme
After selecting the program, press the button Start, to start the preset cooking programme.
The first STAGE indicator will start to blink and heating time will count down.
 End of the cooking programme
Once the end of the cooking time is reached, three signal tones will be emitted and END
will appear in the display.
Button presses
1
2
3
4
5
15.8 Programming with „programming mode"
You can program up to 20 programs by yourself and save them individualy.
► To make sure, not to change in the programing mode during operation, always open the
door for programming.
 Selecting Program
Press and hold the Powerlevel button - the display will show "Program".
 Setting the program number
Press the number keys to be programmed (Time set pad 1 - 0) - the display shows the
selected numbers
 Setting power level
Press the Power button, according to the adjusted performance level - the power level will
be displayed in%.
 Select cooking time
Set the desired cooking time using the numeric keys (Time set pad 1 - 0) one - the display
shows them.
 Save
Press the program after the election the Start button to save your settings. The display
shows "Stage 2" and a long beep is heard.
caso CMP1800
Powerlevel
100 %
70%
50% Medium-high
20% Medium low / Defrost
>0,5%
Please note
Fast cooking and heating
High
Gentle cooking and heating
Reheating of small amounts of
Fast thawing simmering
Low
Usage for
food sensitive
Keeping warm
52