Selecting A Program; Quick Start; De-Activation; Manual Programming/Multistage Cooking - CASO DESIGN CMP1800 Mode D'emploi

 Close doors
Close the door until the door latch audibly locks in place. If a current cooking programme
was interrupted as a result of opening the door, the current cooking programme will be
continued after pressing the button Start.

15.4 Selecting a program

Select the program. The program starts automatically.

15.5 Quick start

Utilise this function to programme the oven for comfortable cooking at 100% microwave
performance.
Press the Start button in quick sequence to set the cooking time. The maximum cooking
time is 5 minutes. If you press the button Start once, the oven will work for 20 sec., if you
press it twice more, it works for 1 min.
The oven starts automatically after 2 seconds.
Once the end of the cooking time is reached, three signal tones will be emitted and END
will appear in the display.

15.6 De-activation:

In order to interrupt an ongoing cooking programme, you can proceed as follows:

Press the Stop button once. The cooking programme that is in use will be stopped.

Open the door of the device. The cooking programme that is in use will be stopped.
► To continue the interrupted cooking program, press the button Start after closing the
door.

To terminate the interrupted program, press the button Stop a second time.
► Before beginning a different cooking process you must delete the display and reset the
system by pressing the button Stop .

15.7 Manual programming/Multistage cooking

When microwaving you can adapt the power setting and the cooking time (max. 60 min.)
 Setting Power Level
Select the desired power setting by pressing the Powerlevel button as often as necessary
to get the setting you want (see table below).
If no button is pressed, maximum power will be used.
Setting the cooking time

Adjust the cooking time by pressing the Time set pad 1-0 accordingly.
caso CMP1800
Please note
Please note
51