Operating Elements And Displays; Signal Tones; Safety Equipment; Warning Notices On Device - CASO DESIGN CMP1800 Mode D'emploi

14.2 Operating elements and displays

1. Display: Microwave Cooking activated
2. Display: Double Quantity activated
3. Display: program number
4. Display: Clean the filter
5. Display: Power Level
6. Power Level: Press to program the microwave power
7. Number Pad (1-0): To adjust the cooking time and cooking programs
8. Double Quantity: Increases the programmed cooking time
9. Stop: To temporarily stop the cooking program or to erase all previous settings.
10. Start / +20 sec: Press to start the cooking program or to adjust the quick-start
cooking program.

14.3 Signal tones

The device transmits the following signal sounds as an acoustic feedback signal:

One signal tone: The device has accepted the entry.

Three signal tones: The cooking time has ended.

14.4 Safety equipment

14.4.1

Warning notices on device

Attention
Danger due to hot surface!
There is a warning notice referring to dangers due to hot surfaces located on the back
upper side of the housing. The surfaces of the device can become extremely hot.
► Do not touch the hot surfaces of the device. Danger of burns!
► Do not set or lay any items on the device.
caso CMP1800 48