Nameplate; Signs And Symbols Used; Symbol Description; Scope Of Delivery - Binzel Abicor BRS-FP Mode D'emploi

BRS-FP/BRS-FPi

3.3 Nameplate

The BRS-FP/BRS-FPi torch cleaning station is labeled with a nameplate on the housing.
Fig. 2
When making enquiries, please note the following information:
• Device type, ID number, serial number, year of construction

3.4 Signs and symbols used

• The following signs and symbols are used in the operating instructions:
Symbol
•

1

4 Scope of delivery

• Torch cleaning station (TCS) BRS-FP/BRS-FPi
Tab. 8
• Assembly stand 831.0285
• Anti-spatter injector 832.0025
• Wire cutter (DAV) 839.0020
Tab. 9
NOTICE
• A set of clamping jaws and a reamer are required for the initial setup and the proper functioning of
Order the equipment parts and wear parts separately.
The order data and ID numbers for the equipment parts and wear parts can be found in the current product
catalog. Contact details for consultation and placing orders can be found online at www.binzel-abicor.com.
BAL.0028 • 2017-03-10
Torch cleaning station nameplate
Description
Bullet symbol for instructions and lists
Cross reference symbol refers to detailed, supplementary or further information
Step(s) described in the text to be carried out in succession
Scope of delivery
Options
the torch cleaning station. These depend on the torch and gas nozzle geometry.
4 Scope of delivery
• Operating instructions
• Maintenance unit 830.0075
• Solenoid valve (24V) 832.0005
EN - 9