Avanti Elite WCSE47R3S Manuel D'instructions page 14

OPERATING YOUR BEVERAGE COOLER
MODEL: BCSE50R3S
It is recommended you install the beverage cooler in a place where the ambient temperature is
between 19ºC-24ºC (66ºF-75ºF). If the ambient temperature is above or below recommended
temperatures, the performance of the unit may be affected. For example, placing your unit in
extreme cold or hot conditions may cause interior temperatures to fluctuate. The range of 3ºC-18ºC
(37ºF-65ºF) may not be reached.
Unit Temperature Range: 37º F – 65º F 3º C - 18º C
ON/OFF Power
To turn OFF the appliance, press the button and hold 2 seconds.
Setting the temperature control
You can select temperature display setting from Fahrenheit to Celsius degree by touching the
button. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature display
window.
If you desire to change the temperature, set the temperature as you desire by touching the or
button. First press the button. The numbers in the display window will flash. The temperature
that you desire to set will increase 1ºF or 1ºC if you touch the button once; on the contrary the
temperature will decrease 1ºF or 1ºC if you touch the button once.
NOTE: If the unit is unplugged, if the power is lost, or turned off, you must wait 3 to 5 minutes
before restarting the unit. If you attempt to restart before this time delay, the beverage cooler will
not start.
When you use the beverage cooler for the first time or restart the beverage cooler after having
been shut off for a long time, there could be a few degrees variance between the temperature you
select and the one indicated on the LED readout. This is normal and it is due to the length of the
activation time. Once the beverage cooler is running for a few hours everything will be back to
normal.
14