Haier GE AB09SC2VHA Instructions D'installation page 11

Installation Instructions
Step 2 - Installation of the Indoor Unit (Cont.)
G.
Remove the electrical box cover. Remove the rubber
grommet and insert a 1/2 inch electrical connector
and reducing washer. Route electrical wiring into
cassette unit. Connect to wire terminas as indicated
in schematic drawing. (USE 14 AWG stranded copper
wire only.)
H.
Connect Grille assembly to cassette assembly.
Connect wires from louver to the harness on the
cassette assembly. There are two wire connections.
(See photo for connections.) Secure louver with four
screws.
Reinstall electrical box cover.
Install return air grille into louver assembly.
Installation is now complete.
31-5000098 Rev. 1
H (cont.).
11