Product Identification; Record Identification Numbers - BE GX390 Mode D'emploi

ATTENTION: READ THROUGH THE COMPLETE
MANUAL PRIOR TO THE INITIAL USE OF YOUR WATER,
TRASH, CHEMICAL AND TRANSFER PUMP
Using the Operator's manual
The operating manual is an important part of your water pump. It should
be read thoroughly before initial use, and referred to often to make sure
adequate safety and service concerns are being addressed.
Reading the owner's manual thoroughly will help avoid any personal
injury or damage to your machine. By knowing how best to operate this
machine, you will be better positioned to show others who may also
operate the unit.
This manual is written to take you from the safety requirements to the
operating functions of your machine. You can refer back to the manual at
any time to help troubleshoot any specific operating functions, so store it
with the machine at all times.
Note: This is a generic manual. Your specific machine may look different
than the pictures shown, but the same concepts will apply.
4
INTRODUCTION
WWW.BEPOWEREQUIPMENT.COM

PRODUCT IDENTIFICATION

Record Identification Numbers

Water Pump
If you need to contact an Authorized Dealer or Customer Service line
for information on servicing, always provide the product model and
identification numbers.
You will need to locate the model and serial number for the machine and
record the information in the places provided below.
Date of Purchase:
Dealer Name:
Dealer Phone:
Product Identification Numbers
Model Number:
Serial Number:
Engine
Horse Power:
WWW.BEPOWEREQUIPMENT.COM
5