Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
STOPPING THE WATER PUMP
Stopping the Water Pump
1. Move engine speed lever to "Slow" position.
2. Push on/off switch to "Off" position.
3. Turn fuel valve to "Off" position.
WARNING
Backfire, fire or engine damage could occur.
• DO NOT stop engine by moving choke control to "Choke" position.
Drain and Flush Water Pump
1. Disconnect and drain suction and discharge hoses.
2. Remove drain plug at bottom of pump.
POWER EQUIPMENT
3. Remove primer plug from top of pump and flush internal components
of pump with clean water.
If you need assistance with the assembly
or operation of your Water Pump please call
4. Replace both plugs and finger tighten.
1-866-850-6662
WWW.BEPOWEREQUIPMENT.COM
18
Publicité
Table des Matières
