Maintenance Schedule - Makita MAC5500G Manuel D'utilisation

MAIntEnAnCE SChEDuLE
ExtRA CARE ShOuLD bE tAkEn
tO AvOID PERSOnAL InJuRIES
wIth AutOMAtICALLy COn-
tROLLED COMPRESSORS
DAILy OR bEfORE EACh uSE
► CHECK OIL LEVEL.
► DRAIN CONDENSATION FROM AIR RECEIVER.
► CHECK FOR ANY UNUSUAL NOISE OR VIBRATION.
► BE SURE ALL NUTS AND BOLTS ARE TIGHT.
wEEkLy
► TURN OFF ENGINE. CLEAN DUST AND FOREIGN MATTER
FROM CYLINDER HEAD, ENGINE, FAN BLADES, INTER-
COOLER AND AIR RECEIVER.
► CLEAN AIR FILTER BY OPENING AIR FILTER, REMOVING
FILTER ELEMENT AND CLEANING IT THOROUGHLY WITH
SOAPY WATER. RINSE THOROUGHLY AND ALLOW TO DRY
COMPLETELY BEFORE ASSEMBLY.
►
WORN FILTERS SHOULD BE REPLACED.
► CHECK V-BELTS FOR WEAR.
MOnthLy
► INSPECT UNIT FOR LEAKS.
► TIGHTEN jOINTS IF LEAKS ARE OBSERVED.
► CHECK V-BELTS FOR PROPER TENSION.
► CHECK COMPRESSOR PULLEY AND ENGINE SHEAVE ARE
ALIGNED AND SECURELY FASTENED.
QUARTERLY OR 300 HOURS (Whichever comes first)
►
INSPECT THE AIR RECEIVER FOR CORROSION OR OTHER
DAMAGE.
► CHANGE COMPRESSOR OIL.
►
REPLACE AIR FILTER (MORE OFTEN IF COMPRESSOR IS
USED NEAR PAINT SPRAYING OPERATIONS OR IN DUSTY
ENVIRONMENTS).
9