Electrolux EXP09HSECI Manuel D'utilisation page 12

12 www.electrolux.com
2. Place the window slider kit on the
window� Adjust the length of the window
slider kit according to the height of
window (Fig� 10)�
The telescopic rod can be extended,
if the window is too high�
To do that, first take out the
telescopic rod completely(Fig�11
A)� Then align the 3 hooks on the
extending rod(sold separately)
to the 3 slots on the end of the
telescopic rod and slide the 3
hooks into the slots, then press
down the extending rod to lock the
slots(Fig�11 B)� After that slide the
combined telescopic rod back into
the window kit(Fig�11C)�
Fig. 11 A
Fig. 11 B
Fig. 11 C
3. Press back the locking lever to fix the
length of the window slider kit, then
close the window and pinch the window
kit between the window and the window
frame, to secure the window kit, peel off
the protect film in the back of the tabs
of the anchor and attach on the window
frame, then fasten the strap(Fig� 12)�
Fig. 10
4. Cut the decoration film to an appropriate
length and stick on the extend rod(Fig�
13)�
C: Decoration film
Fig. 12
C
Fig. 13