Choosing A Projector Set; Changing A Projector Set - Titan CAPSPRAY Maxum II 0277034 Notice D'utilisation

Choosing a Projector Set

Your HVLP spray gun should be fitted with the proper projector
set for the type of work you will be performing. A projector set
consists of a needle assembly, a fluid nozzle, and an air cap.
Needle Assembly
Fluid Nozzle
You should choose a projector set based on two things: the type
of material to be sprayed and the finish desired.
The chart on the following page should help you to make the
right choice.

Changing a Projector Set

1. Remove the air cap ring, air cap, and spring plate.
2. Remove the fluid nozzle.
3. Remove the material flow adjustment knob and spring.
© SprayTECH. All rights reserved.
Air Cap
Air Cap Ring
Air Cap
Spring Plate
Material Flow Adjustment Knob
Spring
4. Remove the needle.
IMPORTANT: If the needle does not slide out easily, loosen
the packing nut to prevent the needle or packing from being
damaged.
5. Install the new projector set in reverse order.
9 English